paper jewelry box wholesale Is there a gift to buy a car in 2015 in the Jinjiang Da Yangtze Audi 4S Store 2015?

wholesale jewelry boxes in bulk There are usually, but the wool is on the sheep.

. Inspection of the car information
1, car purchase invoice: the purchase invoice is the most important proof when buying a car, and it is also one of the vouchers when the car is available, so you must be sure to buy a car Ask the dealer to purchase a car invoice and confirm its effectiveness.
2, Vehicle Qualification Certificate: Qualification Certificate is another important voucher for automobiles, and it is also a must -have certificate for car households. Only cars with a qualified certificate meet the national requirements for the quality and relevant standards of motor vehicle equipment.
3, three packs of service cards: According to relevant regulations, in a certain period of time and driving mileage, if the failure or damage caused by the manufacturing quality problem, you can enjoy the manufacturer's free service with the three packs of service cards. However, cars such as bulb and rubber are not included.
4. Vehicle use instructions: Users must use the vehicle reasonably in accordance with the requirements of the vehicle instruction manual. If the vehicle damage caused by the requirements of the instructions is not used, the manufacturer is not responsible for three packages. The instruction manual also indicates the main technical parameters of the vehicle and the technical data necessary for maintaining the adjustment. It is a reference text when repairing the car.
5, other files or accessories: Some vehicle engines have separate instructions, and some vehicles of some vehicles have special requirements or regulations. At this time, consumers must ask dealers for relevant vouchers.
6. Check the nameplate: check the discharge volume, the annual year, the frame number, the engine number, etc. on the nameplate, the number on the qualification certificate must be consistent with the engine number and frame number on the car.
The documents/vouchers/data of the above parts must be carefully checked. If any omissions and errors are found, the seller must be required to solve it immediately, otherwise it will affect your licenses and future warranty. For large -scale 4S dealers, theoretically there will be no problems in the above information, but for secondary dealers, it is necessary to check carefully to avoid the trap of the traitor due to text or other aspects. Essence Second, the outside of the car
1, the flatness of the body: Check the flatness of the body steel plate and bumper, and there should be no abnormal depression or protrusion. The car body should be straight and the decorative line should be straight, the transition is smooth, and the gap at the interface is consistent.
2, body paint surface: carefully look at the paint surfaces, especially some parts that are easily scraped during transportation. The surface color of the car should be coordinated, uniform, full, flat, and smooth. There are no pores, numbness, wrinkles, bubbles, flow marks and scratches. paint.
3, window glass: Check whether the glass is damaged and scratched, focusing on checking the visual effect of the front windshield. The front windshield must have good light transmission, and areas with abnormal bubbles and abnormal refractive indexes.
4, body assembly: Check whether the gaps in the sewing of the machine cover, trunk lid, door, fuel tank cover, headlights, taillights, etc. in front of the machine are uniform, whether the body in the neighboring position is in the same plane, or whether there is any dislocation and other phenomena. Check whether the opening and closing of each area are smooth and the sound is normal. At this time, check whether the sealing strips are intact, uniform, and flat, and the handles or switches are convenient and reliable.
5, tire part: Check whether the spare tires are the same as the four tire specifications and patterns. Check whether the tire is intact, no wear, and the phenomenon of foaming. Check whether the wheels are clean and perfect without depression or scratches. You should also inquire or measure tire pressure to ensure that the tire is in normal tire pressure and the four -wheel air pressure is consistent. When the tire pressure meets the requirements, the altitude of the symmetrical parts such as the body and the bumper in front of the car should be consistent with the height of the departure of the ground. At this time, you should also push from the side and pull the upper side of the tire, and you should not feel loose. If it is a disk brake, it should also check whether the brake disc is intact, and there should be no obvious wear and dirt.
6, trunk: Whether the trunk space is clean and whether the inner lining plate is flat. If it is a remote control, or the starting method of the inner car, you should check whether the opening and locking are reliable after locking. Generally, the fire extinguisher, the car tool, and the spare tire are placed in the car. Usually there are lining plates for isolation. You should pay attention to check to see if it is complete and fixed. Those who install a multi -disc changer in the trunk should also check the disc. It is best to put a few discs to test audiovisual use.
7, engine compartment: Open the engine cover, check whether the engine and accessories are oily and dusty, especially at the junction of the cylinder head and the cylinder, the oil filter interface, the air conditioner compressor, the steering -to -power pump, the transmission shaft, etc. There are no leaks at the gap. Check whether various liquid surfaces (coolant, engine oil, brake liquid, steering help solution, electrolytic solution, refrigerant, glass water, etc.) are within the normal value range between the highest and minimum scale. Check whether the battery line has been reliable and not loosen, otherwise it will affect the reliability of the circuit.
8, chassis part: Check the phenomenon of cars (coolant, lubrication, brake liquid, electrolyte, and refrigeration solution, oil road) leakage. At this time, and check whether there is oil leakage in each part. For example, the pipelines and raised porcelain on the ground where the vehicles are parked for a long time, some pipes and raised porcelain on the chassis to see the traces of scattered oil stains. If the roller is promoted; if you go to thoroughly, see if there are scratches on the site, whether there are obvious unreasonable places to check the effects, which may be related to the in -depth understanding of the car. It is recommended to accompany the experienced person. If you believe in the reputation of the seller, you can leave most of the inspections except the body paint, because the seller should have been checked in theoretically after the purchase of the goods, but the individual scratches of the paint surface are inevitable of. Of course, if you can further check whether the exhaust pipe fixation is reliable, whether the fuel tank is reliable, etc. 3. Check in the car
1, the degree of cleanliness: check the degree of cleanliness in the car, there should be no dirty things. Especially in the corner, if it is dirty, it may be the rest of the car that others have left or have problems. At the same time, all places should be checked if it contains damaged places, such as Zhongkongtai, seats, roofs, cars, etc.
2, seats: The surface of the seat should be clean and intact. It should be basically comfortable when riding. You should not feel that there are foreign objects in the seat. If the seat can be adjusted in multiple directions, the adjustment test should be performed, and the limit points of each direction must be reached, and the adjustment process can remain smooth and non -strange. If you can fold it later, the folding effect should be checked. If the seat can be poured down at a certain angle, the angle should be adjusted and tested. If the headrest can be adjusted, the inspection should be adjusted.
3, center console: Check whether each part of the central control is complete and the keys are reliable (the car has not ignited, basically can be pressed casually), whether the surface is neat, and there should not be scratches and stains. Those with a sunboard and makeup mirror can be checked together. For other keys in the car, they also conducted preliminary inspections before ignition, such as the air door lock, window, rear air conditioning switch, steering at the steering wheel, lighting, and so on.
4, storage space: Check the neatness of each storage space in the car, and the reliability of opening and locking. At present, there are a lot of storage space in the car. Try not to miss it, such as multiple storage boxes, doors, seats, back and back, back and forth central handrails in the hollow platform.
5, insurance belt: Carefully check the reliability of each insurance belt pull, automatic recycling, and locking, which should be smooth and smooth. The reliability of simulation and checking the insurance band is to drive the insurance band particularly quickly by hand. If it is a highly adjusted insurance belt, it should also be adjusted and tested.