5 thoughts on “99 cent wholesale body jewelry How to compile the red line on the ring”
Clayton
kids fashion jewelry wholesale Spare materials: red line, beads, scissors, lighters. 1, first prepare a red long rope. 2, weave a diamond knot with a red long rope. 3, Vajrayana made two black beads on the two ropes. 4, and then two red ropes to the red beads. 5, and then compile a paragraph as long as the front. 6, now to adjust the size of our ring and pull the circle to the right position. 7, cut the two ropes in the circle to burn it with a lighter, make it thinner, and compile them into the flat knot below. 8, the final beautiful ring is woven.
cheap wholesale rhinestone jewelry The red rope tutorial on the ring The professional is "flat knot", which is relatively strong and durable.
The compilation method is as shown below:
The method is as follows: 1, fold a red line into a U -shaped, pull one of the one in it , Make it as long as one side. 2. Use the left and right thumbs and index finger to pinch the ring ring to press the U -shaped line between the ring ring and the index finger. 3. The end of the U -shaped line is circled from left to right to the ring. At the same time, the short ends should be wrapped in. At the end of the unblocked, there is a buckle 4, the range of sensation is almost the same, and then the opposite direction (that is, from the right to the left). The short end of the U -shaped line before. 5. Put the line head through the buckle from the right to the left to the line buckle, and then pull the thread head that pass through the buckle and the shorter line on the right. It is pulled into the wiring line, so there is no need to knot it, and finally cut off the excess line head.
davinci costume jewelry wholesale The method is as follows: First fold a red line into a U -shaped, pull one end, so that it becomes long and short. Then use the left and right thumbs and index finger to pinch the ring ring between the U -shaped line between the ring ring and the index finger. Tour the long end of the U -shaped line from the left to right to the ring to the ring. At the same time, the short end must be wrapped in. It is also formed a buckle. After the range of the winding is almost the same, it is around the opposite direction (that is, from the right to the left). At this time, it is necessary to ensure that the short end of the U -shaped line can be pulled out at the far right of the winding. Pass the line head through the line from the right to the line to the line, and then pull the thread head that passes through the buckle and the shorter line on the right to pull it in the opposite direction. Inside, there is no need to knot it in this way, and finally cut off the excess line head.
kids fashion jewelry wholesale Spare materials: red line, beads, scissors, lighters.
1, first prepare a red long rope.
2, weave a diamond knot with a red long rope.
3, Vajrayana made two black beads on the two ropes.
4, and then two red ropes to the red beads.
5, and then compile a paragraph as long as the front.
6, now to adjust the size of our ring and pull the circle to the right position.
7, cut the two ropes in the circle to burn it with a lighter, make it thinner, and compile them into the flat knot below.
8, the final beautiful ring is woven.
cheap wholesale rhinestone jewelry The red rope tutorial on the ring
The professional is "flat knot", which is relatively strong and durable.
The compilation method is as shown below:
The method is as follows:
1, fold a red line into a U -shaped, pull one of the one in it , Make it as long as one side.
2. Use the left and right thumbs and index finger to pinch the ring ring to press the U -shaped line between the ring ring and the index finger.
3. The end of the U -shaped line is circled from left to right to the ring. At the same time, the short ends should be wrapped in. At the end of the unblocked, there is a buckle
4, the range of sensation is almost the same, and then the opposite direction (that is, from the right to the left). The short end of the U -shaped line before.
5. Put the line head through the buckle from the right to the left to the line buckle, and then pull the thread head that pass through the buckle and the shorter line on the right. It is pulled into the wiring line, so there is no need to knot it, and finally cut off the excess line head.
davinci costume jewelry wholesale The method is as follows: First fold a red line into a U -shaped, pull one end, so that it becomes long and short. Then use the left and right thumbs and index finger to pinch the ring ring between the U -shaped line between the ring ring and the index finger. Tour the long end of the U -shaped line from the left to right to the ring to the ring. At the same time, the short end must be wrapped in. It is also formed a buckle. After the range of the winding is almost the same, it is around the opposite direction (that is, from the right to the left). At this time, it is necessary to ensure that the short end of the U -shaped line can be pulled out at the far right of the winding. Pass the line head through the line from the right to the line to the line, and then pull the thread head that passes through the buckle and the shorter line on the right to pull it in the opposite direction. Inside, there is no need to knot it in this way, and finally cut off the excess line head.
custom printed jewelry tags wholesale
wholesale garnet gemstone jewelry